Electrovert Cleaners Features

Filter By Product

Aquastorm 100 In-line Cleaner

Cost Saving Advantages

 

The Aquastorm in-line cleaners have several design features that are integrated into cleaner that save chemistry and electrical power.

  • Automatic stand-by mode:The integrated automatic stand-by mode is standard within the Aquastorm in-line cleaners.This feature will automatically shut down pumps and blowers when pcb’s are not being processed through the cleaner.Through an incoming photo cell detect, the in-line cleaner will automatically start each pump and blower as the pcb’s enter into the appropriate section of the cleaning module.This significantly saves on power and chemistry consumption.
  • 5 micron by-pass filter.An integrated filtration system that continuously filters the wash batch fluid through a 5 micron filter.This helps to filter the wash bath and extend the life of the wash fluid.
  • Integrated exhaust plenum and demister:The Aquastorm in-line cleaners utilize an integrated exhaust plenum that effectively balances the intakes of the exhaust ports within the in-line cleaner.The exhaust plenum combined with the integrated demister ensures that exhaust is minimized which effectively saves on chemistry consumption.
  • Torrid Zone Drying:The Torrid Zone drying system is designed to maximize the balance between thermal and mechanical energy within the drying process.The integrated design has proven to save up to 40% less power over conventional drying systems.
  • Commonality across Electrovert Platforms:Electrovert have focused on utilizing common materials, common I/O, and GUI software processes across all product platforms (wave, reflow, and cleaning).This provides cost savings in the form of spare parts (materials and I/O system) and significant savings on training of operators, engineers, and maintenance technicians (GUI software and I/O system).

Drying Performance

 

Electrovert offers several drying options that are designed to provide the greatest amount of value and process flexibility.

The Torrid Zone drying system continues to set the benchmark in drying performance and capability. Electrovert’s patented Torrid Zone convection drying delivers a controlled dynamic process that effectively removes moisture from the PCB. Typical performance includes drying complex assemblies to within .1g of prewash weight.

Durable Design

 

The Aquastorm series cleaners were launched into the market in 1996.  With over 600 total units installed worldwide, the Aquastorm is considered the industries best for precision cleaning performance, quality construction, and leader of ‘long product life cycle’. 

Design, construction, and quality are key attributes that contribute the long history and success of the Aquastorm.  Combined with the innovative features, technologies and performance, the Aquastorm continues to be the industry leader and set’s the benchmark for all other cleaners in the market.

Mixed Spray Technology

 

The clear advantage of the Aquastorm cleaners is the ability to deliver dynamic energy at the PCB surface. While ‘dynamic’ energy consists of a combination of chemistry, thermal, and mechanical forms of energy, the key to the Aquastorm is the utilization of mixed spray technologies to maximize the cleaning capability and providing complete process flexibility.

  • The patented Hurricane Jet™ applies high-impact force for tight spaces (DI Water applications only);
  • The unique oscillating action of the patented S-Jet™ nozzle technology provides maximum flooding for low pressure applications (in-line);
  • V-Jet provides complete flooding action for high pressure applications (in-line and batch);
  • JIC (Jet Impact Cleaning) greatly improves cleaning under low-standoff components with omni-directional spray patterns, and eliminates board and component shadowing effects. (in-line and batch);
  • Mechanical fluid delivery system balances flow and pressure to maximize the dynamic energy at the board surface level (in-line and batch);
  • Chemical Isolation provides optimal process separation and minimizes chemistry consumption (in-line and batch).

Other Value Based Features

 
  • In-line features for small light-weight products (ie: mobile phone and semiconductor type products)
  • Chemistry sampling port
  • Digital flow meters
  • Integrated sump tank with effluent transfer

Process Flexibility and Control

 

The Aquastorm series cleaners are designed to provide maximum in process flexibility and capability. 

  • Mixed spray technologies:  Spray bars, manifolds, and pumps can be configured to provide the greatest amount of process flexibility and performance.
  • Torrid Zone drying:  The drying capability of Torrid Zone will ensure that both your current and future board designs will be dried within the cleaning system.
  • De-flux and misprint cleaning:  The Aquastorm misprint feature allows the ability to de-flux side A and clean the side B misprint at the same time without re-depositing solder spheres onto the PCB (see technical paper case study)
  • Integrated chemistry concentration monitoring capability:  The Aquastorm now offers software integrated chemistry concentration monitoring.  All chemistry concentration parameters (percentages with user-defined alarm functions) are integrated into the machine software.  All parameters are data logged for traceability and trending capabilities.  Only available for specific chemistry types and brands.
  • Field upgrades:  Electrovert always evaluates the feasibility of the technologies to be offered as a field upgrade.  This allows existing users the opportunity to upgrade a current piece of equipment with new technologies.  Check with your local sales representative on availability of new technologies as field upgrades.

Aquastorm 200 In-line Cleaner

Cost Saving Advantages

 

The Aquastorm in-line cleaners have several design features that are integrated into cleaner that save chemistry and electrical power.

  • Automatic stand-by mode:The integrated automatic stand-by mode is standard within the Aquastorm in-line cleaners.This feature will automatically shut down pumps and blowers when pcb’s are not being processed through the cleaner.Through an incoming photo cell detect, the in-line cleaner will automatically start each pump and blower as the pcb’s enter into the appropriate section of the cleaning module.This significantly saves on power and chemistry consumption.
  • 5 micron by-pass filter.An integrated filtration system that continuously filters the wash batch fluid through a 5 micron filter.This helps to filter the wash bath and extend the life of the wash fluid.
  • Integrated exhaust plenum and demister:The Aquastorm in-line cleaners utilize an integrated exhaust plenum that effectively balances the intakes of the exhaust ports within the in-line cleaner.The exhaust plenum combined with the integrated demister ensures that exhaust is minimized which effectively saves on chemistry consumption.
  • Torrid Zone Drying:The Torrid Zone drying system is designed to maximize the balance between thermal and mechanical energy within the drying process.The integrated design has proven to save up to 40% less power over conventional drying systems.
  • Commonality across Electrovert Platforms:Electrovert have focused on utilizing common materials, common I/O, and GUI software processes across all product platforms (wave, reflow, and cleaning).This provides cost savings in the form of spare parts (materials and I/O system) and significant savings on training of operators, engineers, and maintenance technicians (GUI software and I/O system).

Drying Performance

 

Electrovert offers several drying options that are designed to provide the greatest amount of value and process flexibility.

The Torrid Zone drying system continues to set the benchmark in drying performance and capability. Electrovert’s patented Torrid Zone convection drying delivers a controlled dynamic process that effectively removes moisture from the PCB. Typical performance includes drying complex assemblies to within .1g of prewash weight.

Durable Design

 

The Aquastorm series cleaners were launched into the market in 1996.  With over 600 total units installed worldwide, the Aquastorm is considered the industries best for precision cleaning performance, quality construction, and leader of ‘long product life cycle’. 

Design, construction, and quality are key attributes that contribute the long history and success of the Aquastorm.  Combined with the innovative features, technologies and performance, the Aquastorm continues to be the industry leader and set’s the benchmark for all other cleaners in the market.

Mixed Spray Technology

 

The clear advantage of the Aquastorm cleaners is the ability to deliver dynamic energy at the PCB surface. While ‘dynamic’ energy consists of a combination of chemistry, thermal, and mechanical forms of energy, the key to the Aquastorm is the utilization of mixed spray technologies to maximize the cleaning capability and providing complete process flexibility.

  • The patented Hurricane Jet™ applies high-impact force for tight spaces (DI Water applications only);
  • The unique oscillating action of the patented S-Jet™ nozzle technology provides maximum flooding for low pressure applications (in-line);
  • V-Jet provides complete flooding action for high pressure applications (in-line and batch);
  • JIC (Jet Impact Cleaning) greatly improves cleaning under low-standoff components with omni-directional spray patterns, and eliminates board and component shadowing effects. (in-line and batch);
  • Mechanical fluid delivery system balances flow and pressure to maximize the dynamic energy at the board surface level (in-line and batch);
  • Chemical Isolation provides optimal process separation and minimizes chemistry consumption (in-line and batch).

Other Value Based Features

 
  • In-line features for small light-weight products (ie: mobile phone and semiconductor type products)
  • Chemistry sampling port
  • Digital flow meters
  • Integrated sump tank with effluent transfer

Process Flexibility and Control

 

The Aquastorm series cleaners are designed to provide maximum in process flexibility and capability. 

  • Mixed spray technologies:  Spray bars, manifolds, and pumps can be configured to provide the greatest amount of process flexibility and performance.
  • Torrid Zone drying:  The drying capability of Torrid Zone will ensure that both your current and future board designs will be dried within the cleaning system.
  • De-flux and misprint cleaning:  The Aquastorm misprint feature allows the ability to de-flux side A and clean the side B misprint at the same time without re-depositing solder spheres onto the PCB (see technical paper case study)
  • Integrated chemistry concentration monitoring capability:  The Aquastorm now offers software integrated chemistry concentration monitoring.  All chemistry concentration parameters (percentages with user-defined alarm functions) are integrated into the machine software.  All parameters are data logged for traceability and trending capabilities.  Only available for specific chemistry types and brands.
  • Field upgrades:  Electrovert always evaluates the feasibility of the technologies to be offered as a field upgrade.  This allows existing users the opportunity to upgrade a current piece of equipment with new technologies.  Check with your local sales representative on availability of new technologies as field upgrades.

Aquastorm 200 Stainless Steel In-line Cleaner

Cost Saving Advantages

 

The Aquastorm in-line cleaners have several design features that are integrated into cleaner that save chemistry and electrical power.

  • Automatic stand-by mode:The integrated automatic stand-by mode is standard within the Aquastorm in-line cleaners.This feature will automatically shut down pumps and blowers when pcb’s are not being processed through the cleaner.Through an incoming photo cell detect, the in-line cleaner will automatically start each pump and blower as the pcb’s enter into the appropriate section of the cleaning module.This significantly saves on power and chemistry consumption.
  • 5 micron by-pass filter.An integrated filtration system that continuously filters the wash batch fluid through a 5 micron filter.This helps to filter the wash bath and extend the life of the wash fluid.
  • Integrated exhaust plenum and demister:The Aquastorm in-line cleaners utilize an integrated exhaust plenum that effectively balances the intakes of the exhaust ports within the in-line cleaner.The exhaust plenum combined with the integrated demister ensures that exhaust is minimized which effectively saves on chemistry consumption.
  • Torrid Zone Drying:The Torrid Zone drying system is designed to maximize the balance between thermal and mechanical energy within the drying process.The integrated design has proven to save up to 40% less power over conventional drying systems.
  • Commonality across Electrovert Platforms:Electrovert have focused on utilizing common materials, common I/O, and GUI software processes across all product platforms (wave, reflow, and cleaning).This provides cost savings in the form of spare parts (materials and I/O system) and significant savings on training of operators, engineers, and maintenance technicians (GUI software and I/O system).

Drying Performance

 

Electrovert offers several drying options that are designed to provide the greatest amount of value and process flexibility.

The Torrid Zone drying system continues to set the benchmark in drying performance and capability. Electrovert’s patented Torrid Zone convection drying delivers a controlled dynamic process that effectively removes moisture from the PCB. Typical performance includes drying complex assemblies to within .1g of prewash weight.

Durable Design

 

The Aquastorm series cleaners were launched into the market in 1996.  With over 600 total units installed worldwide, the Aquastorm is considered the industries best for precision cleaning performance, quality construction, and leader of ‘long product life cycle’. 

Design, construction, and quality are key attributes that contribute the long history and success of the Aquastorm.  Combined with the innovative features, technologies and performance, the Aquastorm continues to be the industry leader and set’s the benchmark for all other cleaners in the market.

Mixed Spray Technology

 

The clear advantage of the Aquastorm cleaners is the ability to deliver dynamic energy at the PCB surface. While ‘dynamic’ energy consists of a combination of chemistry, thermal, and mechanical forms of energy, the key to the Aquastorm is the utilization of mixed spray technologies to maximize the cleaning capability and providing complete process flexibility.

  • The patented Hurricane Jet™ applies high-impact force for tight spaces (DI Water applications only);
  • The unique oscillating action of the patented S-Jet™ nozzle technology provides maximum flooding for low pressure applications (in-line);
  • V-Jet provides complete flooding action for high pressure applications (in-line and batch);
  • JIC (Jet Impact Cleaning) greatly improves cleaning under low-standoff components with omni-directional spray patterns, and eliminates board and component shadowing effects. (in-line and batch);
  • Mechanical fluid delivery system balances flow and pressure to maximize the dynamic energy at the board surface level (in-line and batch);
  • Chemical Isolation provides optimal process separation and minimizes chemistry consumption (in-line and batch).

Other Value Based Features

 
  • In-line features for small light-weight products (ie: mobile phone and semiconductor type products)
  • Chemistry sampling port
  • Digital flow meters
  • Integrated sump tank with effluent transfer

Process Flexibility and Control

 

The Aquastorm series cleaners are designed to provide maximum in process flexibility and capability. 

  • Mixed spray technologies:  Spray bars, manifolds, and pumps can be configured to provide the greatest amount of process flexibility and performance.
  • Torrid Zone drying:  The drying capability of Torrid Zone will ensure that both your current and future board designs will be dried within the cleaning system.
  • De-flux and misprint cleaning:  The Aquastorm misprint feature allows the ability to de-flux side A and clean the side B misprint at the same time without re-depositing solder spheres onto the PCB (see technical paper case study)
  • Integrated chemistry concentration monitoring capability:  The Aquastorm now offers software integrated chemistry concentration monitoring.  All chemistry concentration parameters (percentages with user-defined alarm functions) are integrated into the machine software.  All parameters are data logged for traceability and trending capabilities.  Only available for specific chemistry types and brands.
  • Field upgrades:  Electrovert always evaluates the feasibility of the technologies to be offered as a field upgrade.  This allows existing users the opportunity to upgrade a current piece of equipment with new technologies.  Check with your local sales representative on availability of new technologies as field upgrades.

Aquastorm 50 Batch Cleaner

Cost Saving Advantages

 

The Aquastorm in-line cleaners have several design features that are integrated into cleaner that save chemistry and electrical power.

  • Automatic stand-by mode:The integrated automatic stand-by mode is standard within the Aquastorm in-line cleaners.This feature will automatically shut down pumps and blowers when pcb’s are not being processed through the cleaner.Through an incoming photo cell detect, the in-line cleaner will automatically start each pump and blower as the pcb’s enter into the appropriate section of the cleaning module.This significantly saves on power and chemistry consumption.
  • 5 micron by-pass filter.An integrated filtration system that continuously filters the wash batch fluid through a 5 micron filter.This helps to filter the wash bath and extend the life of the wash fluid.
  • Integrated exhaust plenum and demister:The Aquastorm in-line cleaners utilize an integrated exhaust plenum that effectively balances the intakes of the exhaust ports within the in-line cleaner.The exhaust plenum combined with the integrated demister ensures that exhaust is minimized which effectively saves on chemistry consumption.
  • Torrid Zone Drying:The Torrid Zone drying system is designed to maximize the balance between thermal and mechanical energy within the drying process.The integrated design has proven to save up to 40% less power over conventional drying systems.
  • Commonality across Electrovert Platforms:Electrovert have focused on utilizing common materials, common I/O, and GUI software processes across all product platforms (wave, reflow, and cleaning).This provides cost savings in the form of spare parts (materials and I/O system) and significant savings on training of operators, engineers, and maintenance technicians (GUI software and I/O system).

Advanced User Interface

 

The Aquastorm 50 software features an advanced user interface that utilizes a 533 mm (21 inches) touch screen PC with the Windows® 7 operating system.  All machine operation parameters are easily viewed to optimize the machine and process controls.

Drying Performance

 

Electrovert offers several drying options that are designed to provide the greatest amount of value and process flexibility.

The Torrid Zone drying system continues to set the benchmark in drying performance and capability. Electrovert’s patented Torrid Zone convection drying delivers a controlled dynamic process that effectively removes moisture from the PCB. Typical performance includes drying complex assemblies to within .1g of prewash weight.

Durable Design

 

The Aquastorm series cleaners were launched into the market in 1996.  With over 600 total units installed worldwide, the Aquastorm is considered the industries best for precision cleaning performance, quality construction, and leader of ‘long product life cycle’. 

Design, construction, and quality are key attributes that contribute the long history and success of the Aquastorm.  Combined with the innovative features, technologies and performance, the Aquastorm continues to be the industry leader and set’s the benchmark for all other cleaners in the market.

Mixed Spray Technology

 

The clear advantage of the Aquastorm cleaners is the ability to deliver dynamic energy at the PCB surface. While ‘dynamic’ energy consists of a combination of chemistry, thermal, and mechanical forms of energy, the key to the Aquastorm is the utilization of mixed spray technologies to maximize the cleaning capability and providing complete process flexibility.

  • The patented Hurricane Jet™ applies high-impact force for tight spaces (DI Water applications only);
  • The unique oscillating action of the patented S-Jet™ nozzle technology provides maximum flooding for low pressure applications (in-line);
  • V-Jet provides complete flooding action for high pressure applications (in-line and batch);
  • JIC (Jet Impact Cleaning) greatly improves cleaning under low-standoff components with omni-directional spray patterns, and eliminates board and component shadowing effects. (in-line and batch);
  • Mechanical fluid delivery system balances flow and pressure to maximize the dynamic energy at the board surface level (in-line and batch);
  • Chemical Isolation provides optimal process separation and minimizes chemistry consumption (in-line and batch).

Other Value Based Features

 
  • In-line features for small light-weight products (ie: mobile phone and semiconductor type products)
  • Chemistry sampling port
  • Digital flow meters
  • Integrated sump tank with effluent transfer

Patent Pending Fluid Delivery System

 

The objective of a mechanical fluid deliver system is to clean under difficult, low stand-off components by maximizing the physical energy delivered at the surface of the area to be cleaned.  The Aquastorm 50 wash fluid delivery system utilizes multiple Jet Impact Cleaning (JIC) sprays that creates a web of omni-directional dynamic energy to remove flux residue.  The web (or storm) of mechanical fluid energy that is created delivers the dynamic energy required to achieve higher product reliability, effectively removing flux residues under the low stand-off components.

Process Flexibility and Control

 

The Aquastorm series cleaners are designed to provide maximum in process flexibility and capability. 

  • Mixed spray technologies:  Spray bars, manifolds, and pumps can be configured to provide the greatest amount of process flexibility and performance.
  • Torrid Zone drying:  The drying capability of Torrid Zone will ensure that both your current and future board designs will be dried within the cleaning system.
  • De-flux and misprint cleaning:  The Aquastorm misprint feature allows the ability to de-flux side A and clean the side B misprint at the same time without re-depositing solder spheres onto the PCB (see technical paper case study)
  • Integrated chemistry concentration monitoring capability:  The Aquastorm now offers software integrated chemistry concentration monitoring.  All chemistry concentration parameters (percentages with user-defined alarm functions) are integrated into the machine software.  All parameters are data logged for traceability and trending capabilities.  Only available for specific chemistry types and brands.
  • Field upgrades:  Electrovert always evaluates the feasibility of the technologies to be offered as a field upgrade.  This allows existing users the opportunity to upgrade a current piece of equipment with new technologies.  Check with your local sales representative on availability of new technologies as field upgrades.

Aquastorm 60 In-line Cleaner

Cost Saving Advantages

 

The Aquastorm in-line cleaners have several design features that are integrated into cleaner that save chemistry and electrical power.

  • Automatic stand-by mode:The integrated automatic stand-by mode is standard within the Aquastorm in-line cleaners.This feature will automatically shut down pumps and blowers when pcb’s are not being processed through the cleaner.Through an incoming photo cell detect, the in-line cleaner will automatically start each pump and blower as the pcb’s enter into the appropriate section of the cleaning module.This significantly saves on power and chemistry consumption.
  • 5 micron by-pass filter.An integrated filtration system that continuously filters the wash batch fluid through a 5 micron filter.This helps to filter the wash bath and extend the life of the wash fluid.
  • Integrated exhaust plenum and demister:The Aquastorm in-line cleaners utilize an integrated exhaust plenum that effectively balances the intakes of the exhaust ports within the in-line cleaner.The exhaust plenum combined with the integrated demister ensures that exhaust is minimized which effectively saves on chemistry consumption.
  • Torrid Zone Drying:The Torrid Zone drying system is designed to maximize the balance between thermal and mechanical energy within the drying process.The integrated design has proven to save up to 40% less power over conventional drying systems.
  • Commonality across Electrovert Platforms:Electrovert have focused on utilizing common materials, common I/O, and GUI software processes across all product platforms (wave, reflow, and cleaning).This provides cost savings in the form of spare parts (materials and I/O system) and significant savings on training of operators, engineers, and maintenance technicians (GUI software and I/O system).

Mixed Spray Technology

 

The clear advantage of the Aquastorm cleaners is the ability to deliver dynamic energy at the PCB surface. While ‘dynamic’ energy consists of a combination of chemistry, thermal, and mechanical forms of energy, the key to the Aquastorm is the utilization of mixed spray technologies to maximize the cleaning capability and providing complete process flexibility.

  • The patented Hurricane Jet™ applies high-impact force for tight spaces (DI Water applications only);
  • The unique oscillating action of the patented S-Jet™ nozzle technology provides maximum flooding for low pressure applications (in-line);
  • V-Jet provides complete flooding action for high pressure applications (in-line and batch);
  • JIC (Jet Impact Cleaning) greatly improves cleaning under low-standoff components with omni-directional spray patterns, and eliminates board and component shadowing effects. (in-line and batch);
  • Mechanical fluid delivery system balances flow and pressure to maximize the dynamic energy at the board surface level (in-line and batch);
  • Chemical Isolation provides optimal process separation and minimizes chemistry consumption (in-line and batch).

Drying

 

Efficient and complete drying is critical to the cleaning process.  An effective drying system will increase throughput, provide cost savings, and boards can go straight to test or conformal coating.  The Aquastorm 60 utilizes field proven technologies that are effective and efficient at drying for all applications.  The ElectroAir air knife technology is designed to maximize the mechanical energy across the entire process width of the conveyor.  The air knives when combined with the high velocity turbine blower, maximize the impact force to effectively remove moisture and dry the product.

Construction and Design

 

Design, construction, and quality are key attributes that contribute to the long history and success of the Aquastorm series cleaning systems.  Combined with innovative technologies and performance, the Aquastorm continues to be the industry leader and set’s the benchmark for all other cleaners in the market.  The Aquastorm 60 is available in either an all stainless steel construction (cabinet, tanks, and all process areas) or in our textured scratch resistant polypropylene.  A standard feature includes our quick connect seamless stainless steel plumbing in all wet sections and a stainless steel drain line.

Direct Dynamic Impingement

 

Cleaning for high reliability products requires a cleaning system that offers the flexibility to maximize the cleaning process.  The Aquastorm 60 offers a range of mixed spray technologies within the Wash and Rinse sections including V fan type, S-jet, and Jet Impact Cleaning (JIC) nozzle types.  The fluid delivery system includes 10 HP pumps as standard.

Custom and Special Cleaning

 

With over 45 years of innovation and process leadership in the cleaning industry, Electrovert is committed to developing new products and services for most cleaning applications.  No matter what the cleaning requirement or challenge may be, please contact our experts to discuss a complete and effective solution.

MicroCel Centrifugal Cleaner

Clean Room Compatible

 

The MicroCel is commonly installed in clean room environments that are common for medical and semi-conductor manufacturing environments.

Complete Drying

 

The MicroCel system uses centrifugal energy and heated flowing air to completely dry complex products in seconds.

Exceptional Cleaning

 

By any measure – ionic, SIR, or visual – cleaning results produced by the MicroCel technology exceed all other Ionic contamination of 0.00 micrograms/inch2, surface insulation resistance greater than 1014 ohms/ince2 and no visible residue at 45X magnification upon component removal are typical cleaning results.

Fixturing

Products cleaned in the MicroCel are held in place and secured to the robot head using either universal adjustable fixtures, standard magazines/carriers, or custom fixtures specific to your product type.

Process Chamber Size

Optimizing the product spacing and location within the carriers, fixture, and process chamber are key to maximizing the centrifugal energy and cleaning performance.  The MicroCel is available with different process chamber sizes that optimize cleaning effectiveness.

Solvent Versatility

 

With today’s uncertainty about tomorrow’s solvents, the risk in buying a cleaning system is substantial.  Expensive new equipment may quickly become obsolete when a change is made in the choice of cleaning solutions.  The MicroCel is the only system currently available that can handle most cleaning solutions, including DI water, saponified solutions, semi-aqueous solutions, detergents, alcohol-based solvents, and terpenes.

Zero Discharge

 

The MicroCel zero discharge system is an automatic, on-board, closed-loop, fully integrated waste water treatment system.  When using solvents that separate from water, the zero discharge system automatically removes the solvents from the used rinse water and returns the wash solvent to the wash reservoir for reuse.  The used rinse water is then processed through the four-stage purification process, including microbial control, 5-micron filtration, carbon adsorption, and mixed bed deionizing resin to restore the rinse water to is original purity level.