Vitronics Soltec Features

Filter By Product

Centurion Reflow

Cathox Flux Filtration System

 
  • Patented Technology of flux decomposition, the revolution of the industry
  • Modular design for various solder paste usage
  • Significantly extended maintenance cycle and shortened maintenance time compared to traditional way of flux condensation
  • Avoid requirement of external devices like chillers
  • Low cost of ownership

AUTOset Profile/RecipeGenerator

 

AUTOset™ provides easy management of the reflow process with accurate profile prediction and increases uptime by eliminating the time to profile. A must-have for high-mix low volume customers.

Industry-leading Thermal Performance

 

With Centurion’s new design backed by our experiences with its prior generations, we achieved better thermal transfer even with wider process chamber. Our knowledge and experience in process control ensure repeatability across the ovens required by the most demanding customers and the most challenging process requirements in the world.

Cost of Ownership

 

With an efficient heat transfer design, Centurion provides low energy consumption. Its reliable and robust design, backed by over 20 years of SMT experience and capability, ensures high uptime even with the toughest reflow requirements. Our patented CATHOX™ further reduces cost of ownership by reducing the maintenance needs through cutting-edge technology of flux treatment. The new ‘idle mode’ option will further reduce cost of operation.

Precise Controlled Cooling

 

Market-proven cooling technology to change from high-temp recipe to low-temp recipe, with controlled cooling over multiple zones. This will reduce recipe changeover time to a minimum. Recommended for high-mix low volume customers to increase uptime.

Traceability

 
  • Management Information Systems provides log files with all set and actual values
  • Barcode software has ability to connect to an individual product
  • Barcode software can be used for automatic program selection
  • Connections to host systems are possible using optional CAMX interface

Maintenance and Accessibility

 

We know that customers spend most of their maintenance time on flux, so we designed our patented Cathox to decompose flux out of the chamber that requires minimum maintenance cycle in the industry.  

Centurion’s design also ensures that where maintenance is required, customers can have easy access and do the maintenance job with limited tools required.

Delta X Wave

Base Wire Support

  • Optional PCB wire support from fluxer to end of main wave
  • Retracts under rail when not in use via down turn cams
  • Supports multi-up panels
  • 1.5 mm wire

PCB Tracking Systems

 

The Delta X platforms tracking systems automatically recognizes the mechanical contact point of all subsystems, these positions can be modified per recipe.

  • Allows for recipes independent optimization of wave contact position
  • Assists with warped assemblies at wave interface
  • Prevents masking of overhanging components
  • Keeps excessive flux of pallets, minimizing cleaning

Nozzle Spray Fluxer

  • Accurate and repeatable
  • Self-speed calibration
  • Heavy duty locking mount of spray nozzle
  • Accurate flux deposition by stepper motor control
  • Sealed flux delivery system
  • Statistical test analysis confirmed high repeatability
  • Under rail protection covers prevent flux penetration to underside of rail and conveyor chains
  • Ease of use

SmartWave

  • Patented technology
  • Ensures excellent hole fill by producing vertical pressure within the wave
  • Allows for soldering certain SMT assemblies with one wave
  • Increase wave depth without pumpkin additional solder

NitroWave

  • Decreases wetting time
  • Up to 50% reduction in dross
  • Easily retrofitted
  • Low cost of ownership

ZEVAm Selective

Closed-loop Flux Flow Control

Integrated mass flow meter has capability to measure during the whole flux cycle directly in the supply circuit to the nozzle.

Closed-loop Preheater Management

Active and precise control of PCB temperature. with automatic adjustment of lamp power to reach desired temperature at the end of the preheat cycle. Improved process control and board to board repeatability with no additional cycle time.

High Frequent Fluxing Technology

High frequency, high-speed, drop jet fluxing meets every cycle time and drop size requirement and increases the process window up to 5 times. Clogging is reduced with larger hole dimension of 180µm.

Management Information System & Barcode Integration

 
  • Barcode integration allows automatically selection of correct program
  • Management Information System saves all set and actual values of a specific soldered product into a log file
  • Linking barcode and management information provides full traceability
  • Connectivity to host computer and Manufacturing Execution Systems (MES)

Precision Wave Height Control

Designed to control the wave height of the Selectwave through a camera. Measures without contact and no additional cycle time. Improves process control and board-to-board repeatability.

Selectwave Solderpot

ZEVA features point-to-point or drag soldering with a rotating nozzle to reduce cycle time. The solderpot is covered to minimize nitrogen consumption and dross formation. On the ZEVAm a movable electromagnetic solderpot allows soldering under an angle.

The patented Solder Drainage Conditioner (SDC) unit is designed to ensure stable wave dynamics and bridge-free soldering.

SmartTeach Programming

  • Standard offline programming software
  • Program without using machine capacity
  • Automatic snap function aligning program over through-hole
  • Automatic calibration, process proposal, and flux volume calculation
  • Uses .DXF, Gerber or pixel based input

ZEVAv Selective

Closed-loop Flux Flow Control

Integrated mass flow meter has capability to measure during the whole flux cycle directly in the supply circuit to the nozzle.

Closed-loop Preheater Management

Active and precise control of PCB temperature. with automatic adjustment of lamp power to reach desired temperature at the end of the preheat cycle. Improved process control and board to board repeatability with no additional cycle time.

High Frequent Fluxing Technology

High frequency, high-speed, drop jet fluxing meets every cycle time and drop size requirement and increases the process window up to 5 times. Clogging is reduced with larger hole dimension of 180µm.

Management Information System & Barcode Integration

 
  • Barcode integration allows automatically selection of correct program
  • Management Information System saves all set and actual values of a specific soldered product into a log file
  • Linking barcode and management information provides full traceability
  • Connectivity to host computer and Manufacturing Execution Systems (MES)

Precision Wave Height Control

Designed to control the wave height of the Selectwave through a camera. Measures without contact and no additional cycle time. Improves process control and board-to-board repeatability.

Selectwave Solderpot

ZEVA features point-to-point or drag soldering with a rotating nozzle to reduce cycle time. The solderpot is covered to minimize nitrogen consumption and dross formation. On the ZEVAm a movable electromagnetic solderpot allows soldering under an angle.

The patented Solder Drainage Conditioner (SDC) unit is designed to ensure stable wave dynamics and bridge-free soldering.

SmartTeach Programming

  • Standard offline programming software
  • Program without using machine capacity
  • Automatic snap function aligning program over through-hole
  • Automatic calibration, process proposal, and flux volume calculation
  • Uses .DXF, Gerber or pixel based input