1. Applications
  2. Cleaning
  3. Specialty Cleaning

Specialty Cleaning

Electrovert® Aquastorm™ precision cleaning machines provide superior cleaning and drying performance, complete cleaning process flexibility, process monitoring, and reliability. The Electrovert approach is to provide the market with a range of cleaners that utilize technologies that exceed cleaning and drying expectations. The process flexibility and reliability of the Aquastorm has proven to be valuable in other industries and applications as well.

Aquastorm series PCB cleaners are used in multiple cleaning applications:

  • Parts cleaning;
  • Industrial cleaning;
  • Lens cleaning;
  • Battery cleaning;
  • Defluxing;
  • Portable device cleaning;
  • High reliability electronics manufacturing;
  • Microelectronics;
  • Semiconductor;
  • Specialty cleaning applications

Cleaning Machines:
Aquastorm 200 SST In-line PCB Cleaner | Aquastorm 200 In-line PCB Cleaner
Aquastorm 100 In-line PCB Cleaner | Aquastorm 60 In-line PCB Cleaner
Aquastorm 50 Batch PCB Cleaner | ​Aquastorm FSM (Free Standing Module) PCB Cleaner
MicroCel Centrifugal Cleaner

Batch cleaning

Batch cleaning is the process of cleaning multiple parts or ‘batches of parts’ as a group where process cycle times are controlled. Batch type cleaners are used in numerous applications throughout the entire semiconductor manufacturing and PCB assembly industries.

Centrifugal Cleaning

In the semiconductor and electronics manufacturing industries, enhanced reliability continues to be a focus of manufacturers and cleaning is seen as a solution.

Cleaning for Semiconductor and wire bonding

In the semiconductor and electronics manufacturing industries, enhanced reliability continues to be a focus of manufacturers and cleaning is seen as a solution.

Defluxing and PCB Cleaning

As high reliability printed circuit boards become more dense and complex, PCB assemblers are seeking ways to enhance reliability. Cleaning is viewed as a process solution. Defluxing is the cleaning process designed to remove solder flux and by-products from the PCB assembly.

Drying Technologies

Drying is the process of removing any residual liquid from the surfaces of washed and rinsed parts. Drying is a critical and expensive stage of the cleaning process, especially for PCB assemblies. The importance of drying is determined by post-cleaning process step requirements.

In-Line cleaning

In-line cleaning is a method of cleaning in which assemblies are processed continuously on a conveyor system and cleaning cycle times are controlled by the conveyor speed.

Industrial Cleaning

The Electrovert® Aquastorm™ series precision cleaning machines are designed to provide superior cleaning and drying performance, complete cleaning process flexibility and monitoring, all with unparalleled reliability.

Misprint Cleaning

As the value of double-sided PCB assemblies continue to rise, it becomes increasingly important for manufacturers to be able to recoup their cost from the assembly when a misprint occurs on the B-side (A-side was successfully printed and components placed and soldered, and when a misprint occurs during the printing process on the B-side).

Parts Cleaning

The Electrovert® Aquastorm™ series precision cleaning machines are designed to provide superior cleaning and drying performance, complete cleaning process flexibility and monitoring, all with unparalleled reliability.